CRM Mitchell1, Author at Paradise Chevron

2014 Ford Focus
Mileage
130,177
Service Date
10/21/2022
Services Performed
R&R front wheel hub bearings. Removed both front steering knuckles. Removed wheel hubs from both steering knuckles and pressed out the old bearings. Pressed in both new bearings and wheel hubs. Re-installed both front wheel hub steering knuckle assemblies. Ensured everything was installed correctly and securely. Test drove to verify repair. Repair complete.
Amy L. gave our service a 5 star review on 10/21/2022
2005 Dodge Pickup
Mileage
84,441
Service Date
10/14/2022
Services Performed
Vehicle was brought in to diagnose an oil leak. Entire oil pan is covered with oil. The highest source of the oil leak is coming from the crankshaft oil seal in the front. Cleaned residual oil and poured 1oz of Oil UV dye to pin point exact location of leak. Ran engine for 10 minutes and used UV light to find oil leak coming from the front crankshaft oil seal. Repair is about 2.5 hrs. Vehicle will be scheduled in the near future for repairs.
Lenny M. gave our service a 5 star review on 10/14/2022
2005 Scion tC
Mileage
230,882
Service Date
10/11/2022
Services Performed
Performed routine maintenance service. Visually inspected fluids, belts, hoses, brakes and tires. All visuals are ok at this time. Topped off washer fluid and coolant. Drained engine oil and replaced oil filter. Set tire psi to 35. Filled oil to capacity. Reset maintenance reminder and placed new oil change reminder sticker in windshield.
Sherae M. gave our service a 5 star review on 10/11/2022
2011 Mercury Mariner
Mileage
85,271
Service Date
9/29/2022
Services Performed
Customer states that the washer fluid sprayers do not operate. Upon inspection of the washer fluid system I found that the hose connecting at the washer fluid pump was not connected. Removed tire and wheel well splash shield to gain access to washer fluid reservoir. Re-connected hose and ensured that the washer fluid now sprays from sprayers. However, there is a leak in the washer fluid line that is attached to the hood. Taped area securely and ensured no leaks at this time. In order to replace line anything that is brittle like the washer fluid nozzles or the lines themselves may break upon replacement taping line is one way to prevent anything else from breaking.
Richard B. gave our service a 5 star review on 10/1/2022
2017 Subaru Impreza
Mileage
55,653
Service Date
9/28/2022
Services Performed
Performed multi-point inspection. Inspected Underhood and found that there are no obvious faults/ issues. All fluids, belts, hoses are ok at this time. Undercarraige inspection also proved to not have any faults nor issues. Brakes, tires, suspension and steering systems are ok at this time. Road test also found that there are no concerns in regards to drive ability. Brakes measure 6mm in thickness in the rear and 7mm thickness in the front.
John D. gave our service a 5 star review on 9/28/2022
2016 Jeep Patriot
Mileage
75,525
Service Date
9/19/2022
Services Performed
Customer stated that the vehicle reaches the hot temperature side of the gauge when driving to Edgewood. Found that the cooling system was low. However, during a cooling system pressure test I did not find any external leaks and no signs of any internal leaks. Recommend topping off cooling system with coolant either 50/50 or concentrate only when topping off system. After filling cooling system to capacity I test drove at highway speeds and still could not duplicate the hot temps. If problem persists I recommend starting with a cooling system flush and thermostat replacements.
Tom H. gave our service a 5 star review on 9/28/2022
2011 Jeep Wrangler
Mileage
114,286
Service Date
9/27/2022
Services Performed
R&R both tail light assemblies.
Bob H. gave our service a 5 star review on 9/27/2022
2017 Hyundai Elantra
Mileage
24,470
Service Date
9/27/2022
Services Performed
Performed routine maintenance service. Visually inspected fluids, belts, hoses, brakes and tires. Topped off washer fluid and coolant. Drained engine oil and replaced oil filter. Set tire psi to 35. Filled oil to capacity. Reset maintenance reminder and placed new oil change reminder sticker in windshield.
David M. gave our service a 5 star review on 9/27/2022
2017 Jaguar XE
Mileage
25,788
Service Date
9/12/2022
Services Performed
Performed multi-point pre-purchase inspection. Inspected all fluids, belts, hoses as well as inspecting for any possible leaks. All visuals under the hood are ok at this time. Did not find any visible leaks. Inspected undercarriage, transmission, bottom of engine, suspension and steering systems as well as inspected the braking system. Did not find any damage nor leaks at this time. Ensured that the brake pads thickness is ok at this time. Tire tread is also ok at this time. Road tested vehicle and verified that the vehicles ride is comfortable and that there is no excessive jounce/ rebound in the suspension system while driving. All interior/ exterior switches, buttons and lights are ok at this time. Multi-point inspection did not find any problems at this time. Vehicle is safe to be driven.
Charlotte M. gave our service a 5 star review on 9/15/2022
2004 Hyundai Santa Fe
Mileage
208,819
Service Date
9/9/2022
Services Performed
Vehicle was brought in to diagnose a no start condition. Prior to inspection I found that the Battery voltage was not enough to crank/ turn over the engine. Tested battery and battery failed. Charged then retested battery showing 12.2v and battery still failed. Replaced battery and found upon turning key on that the fuel pump did not work. Verified that there is proper voltage and ground going to the fuel pump connector. Ensured that all fuses and relays are operational. However when checking voltage going from the relay to the fuel pump I found that the voltage only showed 11.3v even while using power probe to supply voltage to fuel pump. Replaced fuel pump and ensured that there is now sufficient voltage. Verified that the fuel pump works. Vehicle does not start. After replacing battery when scanning for codes there were none. After attempting to start vehicle with new battery and fuel pump I scanned vehicle a second time and found code P0355 CRANKSHAFT POSITION SENSOR "A" CIRCUIT. Inspected the camshaft position sensor and did not find any damage nor obvious faults. Upon inspection of the timing belt and crankshaft position sensor I found that the belt was broken. I had to remove the timing belt covers to inspected. Upon attempting to set vehicle on time to replace belt the crankshaft pistons and cylinder head valves are hitting. Due to this engine being an interference engine there is enough evidence provided to suspect that there is internal damage to the engine. Recommend machining heads and hoping there is no bottom end damage to the engine. Or replacing engine if vehicle is to be made operational again.
Gary L. gave our service a 5 star review on 9/9/2022

CRM Mitchell1

We Service and Repair all CRM Mitchell1 cars