Performed routine maintenance service. Visually inspected fluids, belts, hoses, brakes and tires. All visuals besides rear brakes are ok at this time. Topped off washer fluid and coolant. Drained engine oil and replaced oil filter. Set tire psi to 38. Filled oil to capacity. Reset maintenance reminder and placed new oil change reminder sticker in windshield.
R&R REAR BRAKES DUE TO METAL TO METAL PADS/ROTORS
Danielle R. gave our service a 5 star review on 1/27/2023
2015 Ford Edge CRM Mitchell1
2023-01-28T23:02:36+00:00
REMOVED PASSENGER REAR WHEEL/ TIRE. REMOVED BRAKE CALIPER ASSEMBLY AND ROTOR. HUB IS INTEGRATED TO THE AXLE SHAFT THEREFORE HAS TO BE REMOVED AS AN ASSEMBLY IN ORDER TO REMOVE WHEEL STUDS. R&R 3 STRIPPED WHEEL STUDS ON THE PASSENGER REAR WHEEL HUB ASSEMBLY. CLEANED AND FILED THE THREADS ON THE OTHER TWO STUDS. INSTALLED ALL REMOVED COMPONENTS INCLUDING WHEEL/ TIRE AND TIGHTENED LUG NUTS TO 150FT LBS PER MANUFACTURER TORQUE SPECIFICATIONS.
Frank H. gave our service a 5 star review on 12/7/2022
2013 Ford F-150 CRM Mitchell1
2022-12-08T22:59:44+00:00
R&R front wheel hub bearings. Removed both front steering knuckles. Removed wheel hubs from both steering knuckles and pressed out the old bearings. Pressed in both new bearings and wheel hubs. Re-installed both front wheel hub steering knuckle assemblies. Ensured everything was installed correctly and securely. Test drove to verify repair. Repair complete.
Amy L. gave our service a 5 star review on 10/21/2022
2014 Ford Focus CRM Mitchell1
2022-10-22T22:00:44+00:00
Performed routine maintenance service. Visually inspected fluids, belts, hoses, brakes and tires. All visuals are ok at this time. Topped off washer fluid and coolant. Drained engine oil and replaced oil filter. Filled oil to capacity. Set tire psi to 38. Reset maintenance reminder and placed new oil change reminder sticker in windshield.
Jacob M. gave our service a 5 star review on 8/16/2022
2008 Ford Taurus X CRM Mitchell1
2022-08-17T22:02:14+00:00
INSTALLED CUSTOMER SUPPLIED EXHAUST SYSTEM INCLUDING MAP SENSOR TAP WITH VACUUM LINE. HAD TO CUT, DRILL AND AIR HAMMER STUD TO REMOVE FROM EXHAUST MANIFOLD. ENSURED NO EXHAUST LEAKS ARE PRESENT. FED VACUUM LINE ENTIRELY THROUGH THE BOTTOM OF THE VEHICLE USING ZIP TIES TO SECURE LINE. REPAIR COMPLETE
Rob I. gave our service a 5 star review on 6/28/2022
2014 Ford Fusion CRM Mitchell1
2022-06-29T22:02:36+00:00
Customer brought vehicle in for repair on an inoperable window regulator assembly. R&R Driver front window regulator and motor assembly. Verified that the window is now operable. Repair complete.
Aaron O. gave our service a 5 star review on 5/12/2022
2008 Ford Pickup CRM Mitchell1
2022-05-13T22:01:53+00:00
Changed engine oil and oil filter. Visually inspected fluids, hoses, belts, brakes and tires. All visuals are within manufacturer specifications at this time. Set psi to 35. Reset maintenance light.
Aaron G. gave our service a 5 star review on 11/15/2021
2010 Ford Escape CRM Mitchell1
2021-11-16T23:00:52+00:00
Customer reported vehicle is not reaching appropriate operating temperature during vehicle operation. Vehicle also has a CEL appearing on the instrument cluster. Verified vehicle does not reach operating temp in a timely ordered manner during test drive prior to repairs. Used APOLLO D8 scanner to scan codes. The CEL code is P0128 Coolant Thermostat (Coolant temperature below Thermostat regulating temperature). R&R thermostats cleared codes. Washed engine bay with water after filling coolant level to manufacturer specifications. Test drove and verified vehicle temperature is at manufacturer operating temperature. Replacement of thermostats resolved P0128/ Vehicle operating temperature concern. CUSTOMER IS AWARE OF RADIATORS CONDITION. REPLACEMENT OF RADIATOR WILL BE SCHEDULED AT A FUTURE DATE UPON CUSTOMER REQUEST.
Alex M. gave our service a 5 star review on 9/17/2021
2008 Ford Pickup CRM Mitchell1
2021-09-18T22:01:28+00:00