NOISE IN FRONT HEARD WHILE DRIVING POSSIBLE WHEEL BEARING COULD NOT DUPLICATE CONCERN AT THIS TIME. TEST DROVE IN NEIGHBORHOOD AND ON FREEWAY AND STILL COULD NOT DUPLICATE CONCERN. REMOVED CENTER CONSOLE AND RE-INSTALLED BUTTON. BUTTON CLIPS ARE BROKEN MOLDING IS SPECIAL ORDER.
Bob H. gave our service a 5 star review on 5/23/2023
P0345 CAMSHAFT POSITION SENSOR "A" CIRCUIT (BANK2) Vehicle was brought in to diagnose a CEL illuminated on the dash. Using TRITON D10 diagnostic scan tool I found the code listed above. Vehicle was running but would die while driving and at idle. Ensured that the camshaft position sensor voltage supply to the sensor was sufficient. Ensured a solid ground is also present at the camshaft position sensor connector. Using scanner I monitored engine data and found that the camshaft position % intermittently showed readings and then would show none around the same time the vehicle dies. R&R camshaft position sensor for bank 2 which is on the driver side. Cleared codes. Test drove vehicle while monitoring data and observed that there is a solid response/ reading from the camshaft position sensor. During test drive the vehicle did not shut off. Vehicle will idle for as long as you let it no longer shutting off. Vehicle starts every time ignition is cranked.
Sharon H. gave our service a 5 star review on 12/7/2022
Performed 90k service. Visually inspected all fluids, belts, hoses, brakes and tires. All visuals are ok at this time. Changed engine oil and oil filter. Changed engine coolant, transmission fluid as well as cabin and engine air filters. Set tire pressure to 35psi. Rotated tires. Reset maintenance light and placed new oil change reminder sticker in windshield.
R&R Customer provided head light assemblies. Removed bumper in order to gain access to assemblies.
Sharon H. gave our service a 5 star review on 10/19/2021